Price is for 3 discs. 80 grit, 3M, 3/4" diameter
Collet to insert in rotary tool to hold small 3/32" bits and rotary attachments
Ideal for engraving metal, glass, wood, ceramics, & more! Perfect for micro engravers and rotary tools. Variety of tips
This rotary chuck fits Dremels and some smaller flex shafts. This universal chuck will allow you to effortlessly switch rotary bits when finishing your metal clay pieces.
Drill Bit - 1.0 mm. These are very tiny bits, 1mm is very small, but makes a good pilot hole. Price is for 2 drill bits.
Drill bit 3mm
Assorted drill bits from 2mm to 3mm. Perfect sizes for most projects. Comes in a pack.
This kit has 5 drums of 3 different grits. Total of 15 drums 150 grit, 220 grit and 320 grit. To purchases the barrel drum rotary attachment which doesn't come with this kit, click here
Mini Fibre wheel, very coarse. Grind out small dents and deep scratches. Price is for one.
Medium grit mini fibre wheel. Price is for one.
This polishing kit contains 3 yesllow 80 grit radial disks, one Reverse screw mandrel, 1 slotted mandrel, one tapered slotted mandrel & one fibre wheel. More Rotary Finishing Tools
Perfect high polish, this leather buffer will get you there.
Mini Fine Fibre wheel for satin finish. 3/16" shank. Price is for one wheel.
!/2 price. Use this with any cloth/rag and polish up your jewelery pieces. This is a phenominal metal polish. (150g) One tube lasts forever!
This kit includes the following: 10 dark brown, 10 dark blue, 10 grey, 10 red, 10 green polishing pins, inc.ludes 3/32" shank mandrel. Get into tough small spots and polish them up. Mandrel fits nicely into your dremel, fordom or other rotory tool. 50 piece set.
Silicone polishers are great flex shaft accessories, saving you time at the bench. Medium grit, 10 pack
Rotary tool bit. Add sanding drum on the shaft and sand rough base metal pieces after firing.
Screw mandrel for all types of spinning wheels
Fast and easy these convenient sized Ultra-Polish Pads are great for removing tarnish highlighting when using liver of sulfur or silver black or polishing to a high luster.
Silicone polishing, knife edge. pack of 10. Medium grit
Silicone polishers are great flex shaft accessories, saving you time at the bench. These polishers are recommended for precious metals.• Recommended speed is 1,000–5,000rpm with very light pressure for best results.
Produce an extra high shine with these silicon wheels
Slotted mandrel, cut strips of wet dry sand paper wind around mandrel, tape at the bottom and use on your dremel. Rip worn pieces off. Use tapered mandrel for hard to reach areas.
Place strips of sandpaper in slot wrap around bit, tape on bottom. Use in your rotary tool. Rip off used up sand paper. Buy multiple ones for different grits of sandpaper.
Model 3A tumbler with a simple 3 lb. capacity barrel offers the user economy and performance.